- Error
Model 18
Non-Catalytic Wood Stove
Description
The Model 18 is a highly efficient non-catalytic wood stove designed as a masonry or pre-fab fireplace insert. Use as a freestanding stove with the optional pedestal or traditional Queen Anne legs. The Model 18 is rated at 27,000 BTU's and can heat up to 1,200 square feet (depending on the design and layout of your home). The 17-3/4" height allows the Model 18 to fit almost any U.L.listed pre-fab fireplace.
3.0 grams meets or exceeds Washington State emission standards
Automatic 85 CFM blower standard with unit
Heating capacity up to 1,200 square feet
6" flue exit located 1" from rear of stove
Stove Dimensions
17 3/4"H x 30-5/16"W x 21 3/4"D
Minimum Fireplace Dimensions
17 7/8"H x 25 3/4"W x 11"D
Technical Performance
Heating Capacity 800 up to 1,200 Square Feet
EPA Tested Output BTU/H 22,400
Emissions G/H 3.0
Cubic Feet Firebox Volume 1.3
Firewood Length 16"
Ash Pan No
Blower Yes
Flue Size 6"
Efficiency 63% (Using LHV Method)
Pre-Fab Approved Yes
Stove Weight 326 lbs.
3.0 grams meets or exceeds Washington State emission standards
Automatic 85 CFM blower standard with unit
Heating capacity up to 1,200 square feet
6" flue exit located 1" from rear of stove
Stove Dimensions
17 3/4"H x 30-5/16"W x 21 3/4"D
Minimum Fireplace Dimensions
17 7/8"H x 25 3/4"W x 11"D
Technical Performance
Heating Capacity 800 up to 1,200 Square Feet
EPA Tested Output BTU/H 22,400
Emissions G/H 3.0
Cubic Feet Firebox Volume 1.3
Firewood Length 16"
Ash Pan No
Blower Yes
Flue Size 6"
Efficiency 63% (Using LHV Method)
Pre-Fab Approved Yes
Stove Weight 326 lbs.
